Home > Products > Battery
Neptune Mod
Neptune Mod
  • Neptune Mod

Neptune Mod

Thank you very much for choosing Neptune Mod. Before use, please read the user's manual to ensure correct and safe use. If you need help, please contact our after-sales department.


  • Product Model:20171026001
  • Brand:Anais
  • Time to market:Oct 2017

Product details

  Thank you very much for choosing Neptune Mod. Before use, please read the user's manual to ensure correct and safe use. If you need help, please contact our after-sales department.


  1* Neptune 235W Mod

  1* USB charging line

  1* User manual

G Neptune mods.jpgG Neptune mods.jpg

Basic parameters

  Size: 55*92*25mm

  Material: High quality zinc alloy、Aluminum alloy、Stainless Steel

  Screen: 0.9 inch color screen

  Battery speicification: 2 *18650 batteries, discharge current ≥30A

  Output wattage: 10W~235W

  Temperature adjusting range: 212℉~662℉,100℃~350℃

  Operating voltage: 6.2V~8.4V

  Output voltage: 0.7V~7.5V

  Operating model: wattage model、NI、Ti、SS、Bypass、(DIY1/DIY2)、TCR1、TCR2

  Taste model: Hard、Soft、Standard

  Resistance Range: 0.05Ω~2.5Ω

  Sleep current: uA<200uA

  Charging:5V/2A balance charging

  Automatic detection of resistance,Manual detection of resistance values.

  Lock/Unlock device function


  Protections: Reverse Polarity, output short, low resistance, low battery voltage, overheat &  battery over charge protection , atomizer short circuit protection, atomizer remove protection, high temperature protection, support to Automatic drop power.

G Neptune mods.jpg

The key role

  1.To turn on/off the device: Press the fire button five times quickly within 3 seconds to turn on/off the device.

  2.Confirm key: Menu swift、press to confirm

  3.press“+”button to increase parameter, press“-”button to decrease parameter.


  4.Press“+”button and the setting button at the same time, it will lock/unlock the device.

G Neptune mods2.jpg

How to operate

  Put the battery into the device, the Logo will light and then enter the operation menu, it will indicate choosing new atomizer or old atomizer , the user can choose and set the parameter. 

  Support mode

  Wattage mode, wattage curve DIY1、DIY2、NI200、TI、SS、TCR1、TCR2 mode. Under the main menu, press the enter key, it can adjust mode, Press 2s enter key, it can enter into secondary menu to adjust parameters. 

WATTS mode

  Item 1: (taste choosing)Hard,Normal,Soft

  Item 2: (ATOMIZER) 

  Item 3: (Diagnostics)enter into secondary menu ,there are battery volum,PCBA temp, puffs, back.

  Item 4:(System)enter into secondary menu, there are atomizer automatic detection, version info、upgrade、restore factory setting、back.


  1.Using MICRO USB charging port

  a.Input Voltage: DC 5V±5%

  b.Charging Current: 2A


  2.Take off batteries from the mod, charging it by battery charger.

© 2016 Uvape Technology Co..Ltd All Rights Reserved